Mold progress query-ERP

Location:Home » Manufacturing capacity » Engineering strength


HKY has a professional and experienced team of die engineers, we are proficient in export die standards (such as DME/HASCO), HKY die export proportion reaches 70%. Our engineers use some latest technology and processes to provide excellent service, parts quality, accuracy and delivery speed, to ensure that the highest standards are always met.


Our engineers usually delve into the customer's parts files and perform the following analysis:

  • 01

    Make sure that there is no undercut on the part; any interference with the die action, surface texture or sufficient drawing angle for the part to pop up.

  • 02

    Design appropriate die action according to need. The optimum position of injection gate, the optimum type of gate, the optimum section area of gate and the balance of runner of multi-cavity die are determined.

  • 03

    Determine the water cooling and its position to ensure that heat transfer is sufficient to make the temperature of the die cavity side and core side as uniform as possible, and to ensure that part of the heat on the cavity or core is not protected.

  • 04

    Ensure that there are enough vents on the die and that there is no air trap during high-speed forming.


A good Engineering team is a security to guide each project running smoothly or not, even successful or failing. HKY Mould pays lots of attention to the mould construction, feeding systems, cooling channels and moving mechanisms to ensure the highest quality Injection molding parts are delivered from the injection mould at the minimum cycle time. The professional engineers from HKY Mould will make the good mold design to help the customer to solve the issues in structure and function to the products,
We are happy to provide our professional  suggestions regarding part design an mold making feasibility to your new product development as well

The software we are using

UG, Auto CAD, Pro/E, Solidworks,
Mould flow Analysis will be provided during the Injection mould design period.
General Mold design  steps
1. DFM(mold for feasibility) report sending to the customer before mold design.

2. Start working on mold design according to DFM report approval.

3. Send whole 3D mold design to customer to confirm and make analysis

4. Discuss with customer incase any issue .

5. Drawing the final mold design after customer approval.

6. Start order steel and manufacturing.

Contact Us

TEL: 0086-755-23573733


Adress: Room #102, Building #50, Shu Tianpu Xin xing Industry Zone B, Matian Street, Guang Ming District, Shen Zhen city, Guang Dong Province, China, 518101.

HKY Mold Technology Co., Ltd

HKY Mold Technology Co., Ltd Follow Us Through Media: GET INSTANT QUOTE